Radoil.com
Products
Capabilities

Facility

24,000 sq. ft. of enclosed shop completely served by a 10 ton overhead crane with 19’ hook height plus outside paved and unpaved areas.

  • 25,000 lb. Hyster Forklift
  • 5,000 lb. Forklift
  • 10,000 lb. Forklift
  • 15,000 lb. Forklift

Technical Staff

  • 2 mechanical and 3 electrical engineers on staff
  • 6 senior design draftsmen operating on Autocad 2009
  • 2 senior design operating on Inventor 2009

Machine Department

  • CNC Lathe
  • Sunstrand 50 HP C5U Rigidmill: 156" x 30" table with 120" x 40" x 36" travel
  • Kearney & Trecker 415: 80" x 15" table with 50" x 18" x 20" travel
  • Acer Mill 3VS: 42" x 19" table with 28" x 12" x 16" travel
  • Bridge Drill (Custom manufactured): will drill holes any place in an 8’ square plate
  • Monarch lathe: 24.5" (15") swing, 2" bore, 360" between centers
  • Jet Lathe: 16" (10") swing, 3" bore, 60" between centers
  • Famot Lathe: 14" (8.5")" swing, 1.5" bore, 40" between centers
  • Miscellaneous drill presses and support equipment

Welding Department

  • 6 mig/tig/stick welding stations in the 200-300 amp range
  • 6 welders qualified to Radoil qualified weld procedures
  • Portable outside welding building, 20’ x 20’ x 12’ tall
  • Weld positioner, track torch, mag-base drill, welding tables, etc.

Assembly & Test

  • Tall Test Stand – horizontal or vertical testing, 12’ maximum length, 75,000 lbs.
  • 75,000 lbs. electronic load cell
  • 475 h.p. pumping skid capable of 6000 p.s.i.
  • Portable test station capable of 15,000 p.s.i.
  • 900’ X 6 5/8" test pipeline for subsea extended reach blockage remediation development
  • 3" test loop for subsea paraffin deposition studies

QC Department

  • Equipped with full time QC staff with MRB support for our product areas
  • ISO 9001:2008 Certified
Home | Location | Site Map | Terms & Conditions | Contact Us
12251 FM 529 Houston,Texas 77041 (713) 937-4494 Phone (713) 937-4624 Fax | © 2009 Radoil, INC. All rights reserved.